<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 7996] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>0</y>
    <z>-1</z>
  </AxisAsymmetric>
  <DisplayInformation>Gt-Medical - Prime Direct ST</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>Gt-Medical_Prime_Direct_ST</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">5</AxisScrewChannelMaxUserAngle>
  <Supplier>Gt-Medical, S.L.</Supplier>
  <SupplierLink>www.gt-medical.com</SupplierLink>
  <SupplierVersion>V4</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.60000038146973</x>
        <y>6.72342872619629</y>
        <z>-1.06919384002686</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-001-oct-di.stl</MarkerFilename>
      <ImplantFilename>anlg-001-oct-di-dig-v1.sdfa</ImplantFilename>
      <DisplayInformation>Tissue Lvl RN®</DisplayInformation>
      <Keyword>TissueLvlRN</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">5</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-001nod-b1r-v1.stl</SupportFilename>
          <ScrewFilename>ex-st-001ocd-t1r-conic-v1.stl</ScrewFilename>
          <DisplayInformation>ROT (Conico30)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTConico30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-001nod-b1a-v1.stl</SupportFilename>
          <ScrewFilename>ex-st-001ocd-t1a-conic-v1.stl</ScrewFilename>
          <DisplayInformation>ROT (ANG_Conico30)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTANG_Conico30</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-st-001ocd-b1r-v1.stl</SupportFilename>
          <ScrewFilename>ex-st-001ocd-t1r-conic-v1.stl</ScrewFilename>
          <DisplayInformation>NoROT (Conico30)</DisplayInformation>
          <Keyword>NoROTConico30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-st-001ocd-b1a-v1.stl</SupportFilename>
          <ScrewFilename>ex-st-001ocd-t1a-conic-v1.stl</ScrewFilename>
          <DisplayInformation>NoROT (ANG_Conico30)</DisplayInformation>
          <Keyword>NoROTANG_Conico30</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-gt-001nod-b1a-v1.stl</SupportFilename>
          <ScrewFilename>ex-gt-001ocd-t1a-univ-v1.stl</ScrewFilename>
          <DisplayInformation>ROT (Univ)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTUniv</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-gt-001ocd-b1a-v1.stl</SupportFilename>
          <ScrewFilename>ex-gt-001ocd-t1a-univ-v1.stl</ScrewFilename>
          <DisplayInformation>NoROT (Univ)</DisplayInformation>
          <Keyword>NoROTUniv</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999994277954102</x>
        <y>8.472294807434082</y>
        <z>-1.0727939605712891</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-001-oct-pc.stl</MarkerFilename>
      <ImplantFilename>anlg-001-oct-pc-dig-v1.sdfa</ImplantFilename>
      <DisplayInformation>Tissue Lvl RN®  sobre Synocta®</DisplayInformation>
      <Keyword>TissueLvlRNsobreSynocta</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>b1-001-noc-pc-st-v1.sdfa</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>b1-001-oct-pc-st-v1.sdfa</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999994277954102</x>
        <y>7.1927022933959961</y>
        <z>-1.0867433547973633</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-002-oct-di.stl</MarkerFilename>
      <ImplantFilename>anlg-002-oct-di-dig-v1.sdfa</ImplantFilename>
      <DisplayInformation>Tissue Lvl WN®</DisplayInformation>
      <Keyword>TissueLvlWN</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>b1-002-noc-di-st-v1.sdfa</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>b1-002-oct-di-st-v1.sdfa</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5999994277954102</x>
        <y>8.4961719512939453</y>
        <z>-1.0747852325439453</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-002-oct-pc.stl</MarkerFilename>
      <ImplantFilename>anlg-002-oct-pc-dig.sdfa</ImplantFilename>
      <DisplayInformation>Tissue Lvl WN®  sobre Synocta®</DisplayInformation>
      <Keyword>TissueLvlWNsobreSynocta</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-002-noc-pc-st-v1.sdfa</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-002-oct-pc-st-v1.sdfa</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.39999961853027</x>
        <y>7.15006732940674</y>
        <z>-1.08139133453369</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ex-st-040sqr-scn-v1.stl</MarkerFilename>
      <ImplantFilename>anlg-040-sqr-33-dig.sdfa</ImplantFilename>
      <DisplayInformation>Bone Lvl NC®</DisplayInformation>
      <Keyword>BoneLvlNC</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-040nsq-b1r-v1.stl</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-040nsq-b1a-v1.stl</SupportFilename>
          <DisplayInformation>ROT (ANG)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-040sqr-b1r-v1.stl</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-040sqr-b1a-v1.stl</SupportFilename>
          <DisplayInformation>NoROT (ANG)</DisplayInformation>
          <Keyword>NoROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.4000015258789063</x>
        <y>7.2133269309997559</y>
        <z>-1.1358957290649414</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ex-st-041sqr-scn-v1.stl</MarkerFilename>
      <ImplantFilename>anlg-041-sqr-41-dig.sdfa</ImplantFilename>
      <DisplayInformation>Bone Lvl RC®</DisplayInformation>
      <Keyword>BoneLvlRC</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">5</AxisScrewChannelMaxUserAngle>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-041nsq-b1r-v1.stl</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>-0</z>
          </AxisAsymmetric>
          <SupportFilename>ex-st-041nsq-b1a-v1.stl</SupportFilename>
          <DisplayInformation>ROT (ANG)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-st-041sqr-b1r-v1.stl</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ex-st-041sqr-b1a-v1.stl</SupportFilename>
          <DisplayInformation>NoROT (ANG)</DisplayInformation>
          <Keyword>NoROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.40000152587891</x>
        <y>7.81538486480713</y>
        <z>-1.05906987190247</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-007-hxl.stl</MarkerFilename>
      <ImplantFilename>anlg-007-hxl-35-dig.sdfa</ImplantFilename>
      <DisplayInformation>BLX® RB/WB</DisplayInformation>
      <Keyword>BLXRBWB</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-007-nhl-st-recto-v1.sdfa</SupportFilename>
          <DisplayInformation>ROT</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-007-nhl-st-ang-v1.sdfa</SupportFilename>
          <DisplayInformation>ROT (ANG)</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>ROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-007-hxl-st-recto-v1.sdfa</SupportFilename>
          <DisplayInformation>NoROT</DisplayInformation>
          <Keyword>NoROT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>b1-007-hxl-st-ang-v1.sdfa</SupportFilename>
          <DisplayInformation>NoROT (ANG)</DisplayInformation>
          <Keyword>NoROTANG</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.69999980926514</x>
        <y>6.72480249404907</y>
        <z>-1.63138389587402</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>scn-012-con.stl</MarkerFilename>
      <SupportFilename>b1-012-con-st-v1.sdfa</SupportFilename>
      <ImplantFilename>anlg-012-con-46-dig.sdfa</ImplantFilename>
      <DisplayInformation>Cono Bone Lvl NC®  RC®  y BLX®  RB/WB</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>ConoBoneLvlNCRCyBLXRBWB</Keyword>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2022-03-11T09:05:45.5259520Z</SignatureDate>
  <InfoSignature>Not yet signed</InfoSignature>
  <InfoSignatureV2>WDcIYHiCyqK0xW6Z9SolLkwOZwLIDw+821hMe0WT7WzhNf961RbLbgjeVHCJW4sMSHyinvAgWanh/ZIR20mFZGRRCvi5LopHpaq9d+T2fXJXz+fNO4KdVrsoY2W3MEQErpapkJw0QFAwRnYgRlecczf6dxBLgVeqnKRiOaZQMskbmqj/+rLE4/eH7IIqqDymVicGcz5LzWEy5up7a9qNiOhTTWqFatp+jZPQsqT6iJfWl1Gmxj0Ww6cyHObI0KiCrk+nDIv3d/B9agfu6iyxioOQQC4bLFwyYpKKyTAElKOKEZazheSvhiGe1KZQs8jhs5ZpOTwcK3Hm/6h3izrn4w==</InfoSignatureV2>
  <InfoSignatureV3>vRETjyiuw+mKgpNBM7XJIb/cRZAAhgZKAtb//2uj4K9GYBrxVXxSkIsouk+7SF4+rYmvmCpLIW0jvUp9Xw94pbKsqzQ0W5t6LxkWl8nZNTIj2wJAPR1wtPIwDfuG83G7qydP4yMdn0CbuvpeB0sGORfN4oFdbChCI3oGyGrZAQ2aPag5+2Wk2RZAIIwhP+kFfHxjnGLjpzY3UrUtm5a7vqsH6EHn6rpgEGFuSolS603yrtIbb0yOLPRdwWmOJCxdpoN6Ol6P+BaV0a452u+sVzBzpmOMlKDGNYGB6ReAKymeWQiTEULAHHyGi8PtOqkhavaUxk8DoI03wLesgK6FrA==</InfoSignatureV3>
  <InfoSignatureV4>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</InfoSignatureV4>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>scn-001-oct-di.stl</Filename>
      <Signature>20lhVDKikPGWojRs+wyWEcLJ5zv6vdW9tUy0J0oBDbaIcrIsv0iqlGPy/eIxDczmUu0tHO1Gsn2PDlym/kUX/w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-001-oct-di-dig-v1.sdfa</Filename>
      <Signature>gjLnwZEMmCjavdBv4K/pbghV5RXhsZVE798w5jQqUNWWnJdK+Thc9umX/VjAKCrZdIddPMbHgbFR0J05X1fH9A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-001-noc-di-st-v1.sdfa</Filename>
      <Signature>fW1U0d+SadIaDtcsbQjTLTi7WSH7dlLiqM3DUZj+wj9I+tBzhUWo0OktHeJI8WCTqL1xz9sbVSePi41js1ap8w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-001-oct-di-st-v1.sdfa</Filename>
      <Signature>TYfemW1jJ68sfY9q63sYqtIL4C9V7XtPb1seTRmQmSbYHH5ElTAuXNkS+xqa3cEUsFRJGrruYIUHqFUfBQG65w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-001-oct-pc.stl</Filename>
      <Signature>CGguB0AU+BxmV4gIHabjUdinxXkAMOfWpdRM2luRATM+ybeXe6ooCOhftV06c/dAolnfmSmf60CDw3HNtTPWPQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-001-oct-pc-dig-v1.sdfa</Filename>
      <Signature>f+VAxNHwMqnfP82yubkBOSsF/QPNxj/RoRbALchan/1KjD3hZJ+5f30uwAqnWY5XQs9LFr2G2PxWiNl9oC+ZDg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-001-noc-pc-st-v1.sdfa</Filename>
      <Signature>GEej4UcGZ9THF7QO0S4bvlQZzVAknSqzfp/DyeEtuu2OxFJ8NAhHosvxp9NYf85klQYPxN3rPVLVTBWm+LvItg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-001-oct-pc-st-v1.sdfa</Filename>
      <Signature>YNNUZL+RtlyC2jmBhHPRVDd8LMvs2TwGFgiup4L6rvsq5++hpq/etQU2SOE4f9Kyg2zn8bxAyNHXpnzzKXVeWw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-002-oct-di.stl</Filename>
      <Signature>vdFc749z1UpLtkufxyHEMecvZwoR0yyM20QK/bMUfp+SQ8DaIxrRn/QVrg5vSxw6qJYNfEdxO9YTYs2LAGXJIg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-002-oct-di-dig-v1.sdfa</Filename>
      <Signature>mlRp1g9hnJZwiAfxzd6peW3qqnCTy8RrINfFKIUuYFs4eQ1g21h6rWSE9hbafWeQVN3sOPGc0t8WHfQKtWTEEg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-002-noc-di-st-v1.sdfa</Filename>
      <Signature>j7t8BnYFevqrWwGMgjjIYc61PvNlLr94dMMZWCD8o7Rb7s+KFL9GqUxMqAFhMQXaYyBrccavBOeAZ5dOXQ8Xkg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-002-oct-di-st-v1.sdfa</Filename>
      <Signature>dCpnogDquGrgQtYwhdAOFlBdwSPqlsERIN9dkCz06nPlc+yTgllHo9OV8JHYKHl7najTqWS6eUB6ZN3MRei4IA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-002-oct-pc.stl</Filename>
      <Signature>qWmj89uU8D2i4Ymk3ndUuJAoZcn0J3vs4qH5rLQb//Np38IsngDwIPW4ZNEFvReG9Yuj9pAs+WdsYn1uFLAMqg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-002-oct-pc-dig.sdfa</Filename>
      <Signature>0aYWwUFN0l+C749KKfHXPEKs5/ajcdBGWGQ6Z+6YmFg++GTVXWsmtyN3dmlJOVpeWnm2cSF83C4V6+1j2m0ebQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-002-noc-pc-st-v1.sdfa</Filename>
      <Signature>qMdFoK/9m0+HYxrMVErWy+5Wun4YJ/d9LtfpfcpsFR0uuS3zZ34U0pIVMAMlOgbuHyeoL/3bFWJyn3YeDiuUrA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-002-oct-pc-st-v1.sdfa</Filename>
      <Signature>GfPRvl0LQ1V6d8qxzUnPBSS7jCLhYWCmJIi6LymQzTkDdRGYZskoBW4yemW56edlzhzryPuDtAhTT5CXuw2FNw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-040-sqr.stl</Filename>
      <Signature>azfucV0DoE4PDnQKaExLnlzEFF17LXWfdC4ikM4UWnOTg3yHRhVdjPcH5VtWvbt4SpbqyKDfClQ/q3E5azoeRw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-040-sqr-33-dig.sdfa</Filename>
      <Signature>1XYHJI/iAWJWRvP/qqPqmHPLoRD+sx1wey5vOaV+5Poee6SoLgVeHZZ58u3YN6o8ricQ2RqemYWBlGVyaFIV+Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-040-nsq-st-recto-v1.sdfa</Filename>
      <Signature>YKxe70y9l1RRqSf7fJHrzrl+fMaHIYymvqvYB6xO2HyKBDEGgvgmn+jj7SS9XVi0v9dfK6keMQRPhvnbCeWwmQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-040-nsq-st-ang-v1.sdfa</Filename>
      <Signature>BFzQlPHjLhqqPBLdlzIQKwfMDB8PClOzp9NqobBSyjib47wD86Ijfo18QimWMOXUyEzhnyC4nbrs4wt49o9uXQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-040-sqr-st-recto-v1.sdfa</Filename>
      <Signature>X+ysj3Ob5TAUNyjFuhDtLsbeFTkKc1gP5C7Zm042UnOSBasSAkjcUf8pyg5mZS97GazJym4e+1ijvii6AnzpYg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-040-sqr-st-ang-v1.sdfa</Filename>
      <Signature>3LRN0Fq/0fwt/1n25P+6KT2wSXZaePeSHmDQl7gdYMa1wIiV5o1yUCFNyyzsdNyZTMusMCwWHL1cNo+6y24XtQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-041-sqr.stl</Filename>
      <Signature>kMtwk9O2X2InGSCxjuKrJfG3B7lv5JkClvZilSfY6xXvIQ6haQY5ustfvdOX6pK+aEt40e/+U+rB8UL+ruVHUQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-041-sqr-41-dig.sdfa</Filename>
      <Signature>ZKbba0WJ/0VM5ZXCKSfINGrB2tznVweDyBijraNYkP855PWVKbRQOXoq6ogtioK1u7BYvA0luxmJCafLg3TduQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-041-nsq-st-v1.sdfa</Filename>
      <Signature>GD1GY0zKeCpfqxHgZHwZb/W0ahAc3BS/QY8qmw0+ls1PdORU2xvWoTh/7tQ/PlIFet+++6BusHFkOqG8P4/U3Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-041-sqr-st-v1.sdfa</Filename>
      <Signature>UHJYTU9WXOQzOqdqSlg5VBaDMsfNdM41XlFSweBQiyuc/eOKzVuWtQnuJ8jFdm1vy8kp6zsw1u1HYOxwG/yhgw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-007-hxl.stl</Filename>
      <Signature>Qgzh5fwFrMm2nQ6/CQyOjELSI1qnO0aiDMPCp/Tg7AVOrlof0ZcE9SPFNbnKOjhimCVMTYM40e1rwh4AAu0HxA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-007-hxl-35-dig.sdfa</Filename>
      <Signature>CSZ1uZCQqlF/aqaQ+oktNUhhTVYx9qxfvQdIa5pJOSJrFo1hOEz0hLCkAoRMnxktG+W53VIfANx9BgDXDMnYVw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-007-nhl-st-recto-v1.sdfa</Filename>
      <Signature>tH48ikMIB8yNaqWIMPQ1FJzXnKCwcr0Oii+xgUs48oxT2qQdvM0WDqT3gcrFL9n456Mulc1yoaxF7IqLyW263A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-007-nhl-st-ang-v1.sdfa</Filename>
      <Signature>LB7Q9/D3M9jmqTtiPOHiC8ZFsAjWBVGTAXkrOsO20buYZ8gw3b47Va6qE24+O/zUORT+HQ7oXhXOCAHgPJsNSw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-007-hxl-st-recto-v1.sdfa</Filename>
      <Signature>n+t74EFxcHmkEQud15V1CHwjh/WAu/O63EdHcsW03IxKefRCT8n6twkz9UI2DDddX302vZHcQlLK4OzCDyjuFQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-007-hxl-st-ang-v1.sdfa</Filename>
      <Signature>tbaOxhSsmcV25N8GuUqYqs0whZTJVXWVw64esCGhrNhmcFNj0tOwfVhG9wBDdd+HR/AVxWQbk8kFy4srMtkL1g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>scn-012-con.stl</Filename>
      <Signature>d62X1sGmKYIwhvIn2V2tau1/Ge3qC/tVZ38Hi50LJ643N7PbenqkwSTFUMK7bg25QJrTU1OYlFg77y/gxxYFKw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>b1-012-con-st-v1.sdfa</Filename>
      <Signature>QxpQd3oS8NX7NpEmj+Z4iqJFgwquGmq33/E8Lo6Ei3Mhb3XjuI17FthiplYgpcvx/gSk4o6kPTCOcb9LPuwk7Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>anlg-012-con-46-dig.sdfa</Filename>
      <Signature>PpxHQyieAjcgjNDrsVf6GZtTDLsvmQ5Zre6qNqwFiW7VApmkF9SsqLqv+vjggGfuAWMd9yjeDns6Opcd89L67g==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>